Phone：+86 133 2682 0449
Email：diko@dikopump.com
| 14 Inch Water Filled Motor | ||||||||||||||||||||||||||
Voltage |
3 Phase 380/415V 50Hz | |||||||||||||||||||||||||
Power |
160 | 180 | 220 | 260 | 300 | 350 | 400 | 420 | ||||||||||||||||||
Current |
326 | 365 | 445 | 526 | 607 | 705 | 810 | 845 | ||||||||||||||||||
RPM |
2950 | 2950 | 2950 | 2950 | 2950 | 2950 | 2950 | 2950 | ||||||||||||||||||
Length |
1690 | 1735 | 1860 | 1935 | 2040 | 2185 | 2235 | 2315 | ||||||||||||||||||
Weight |
685 | 710 | 790 | 840 | 900 | 990 | 1080 | 1180 | ||||||||||||||||||
Features: |
| NEMA Standard. |
| These motors are perfect in design and simple in construction with the features of low – noise , energy efficient excellent performance reliability and easy maintenance. |
| Bearings of latest design are made of best quality materials ,thus the motor can operate under high axial thrust and longer motor run life can be guaranteed. |
Technical Data: |
| Rated Voltage : 380V, 3 – phase A.C. 50Hz , synchronous speed : 3000RPM. |
| Motor Operates Continuously. |
| Motor’s rated output can be guaranteed when rated voltage deviation does not exceed ±5% and rated frequency does not exceed ±1% . |
| Motor bearing’s permissible axial down thrust: Min.: 35kN, Max.: 75kN. |
Working Conditions: |
| The motor should be completely submerged in water . It’s highest position should be below the moving water level . But should not exceed 70m . It’s lowest position to well bottom should be no less than 5 meters. |
| Well water should be generally clean , containing sand no greater than 0.01% (by weight). |
| Well water temperature should not exceed +35℃. |
| Well water contains no chemical corrosives , PH value with in 6.5 – 8.5. |
| Motor should be operated in vertical . Water passing the motor’s surface is more than 0.5m/s . In order for heat – dissipating .
|
